Napier Airgun Pull Through Kit

Product Information

Want to achieve the ultimate in accuracy? The secret is simple: regular cleaning and relubrication of your barrel. A: The kind of cleaning kit you’ll need for your air rifle will depend on the calibre of your airgun. Most air rifles are .177 or .22 calibre, so you’ll need a kit that includes a bore brush for those sizes, as well as suitable oil and cleaning pellets. You may also want to get a pull-through cleaner, which can be helpful in getting all the dirt and grime out of your barrel. Q: How do I clean my air rifle barrel?

How to clean your airgun - Airgun Magazine How to clean your airgun - Airgun Magazine

A brush can be attached to the rod to agitate deposits in the bore. Traditionalbristles are made of phosphor bronze, an alloy of copper, but many shooters prefer to use brushes with nylon bristles, which are less likely to cause any damage. A: The best way to clean your air rifle pellets is with warm, soapy water. This will get rid of any dust and debris. When dried, they should be lubricated with oil to prevent oxidation. Cleaning air rifle pellets may improve accuracy and prevent fouling. Q: Can I use WD-40 to clean my air rifle? Use just the right amount of compound or solvent – you don’t want it seeping into internal areas such as the transfer port Airgun oil: Aerosol oils like Power Airgun Oil can be sprayed down the barrel to help loosen lead deposits before cleaning begins in earnest. The same oil can be sprayed on the patches for use with the pull-through. I decided to put my money where my mouth is and try it in a number of my own air rifles, but using a pull-through rather than a rod. When using any type of liquid near the breech of an airgun, less is definitely more, and I was careful to use a minimal amount with each pass of the patch.

Why Clean an Air rifle?

Gun Cradle: Some way to hold the rifle steady is a must. This particular Gunsmith’s Maintenance Centre from MTM is about 13 years old and is still going strong. Right: Take hold of the pull-through and pull the patches through the bore, taking care to keep everything central and away from the crown As mentioned above, I’m not a fan of using cleaning rods with airguns, but bore paste can be applied using a pull-through. It won’t be as thorough, but you can repeat the process as many times as you like until you’re happy with the result.

Power Pull Through Kit | Napier UK – Napier-usa Power Pull Through Kit | Napier UK – Napier-usa

And last but not least, don't forget to give the outer surfaces a good clean and polish with one of the field patches supplied in your Napier power pull-through kit. Instructions and component case Watch our video on How to clean an air rifle and How to clean an air rifle barrel Bore pastes are grey to begin with, so that will account for some of the discolouration on the used patches, but the results were nevertheless incredible. When you notice your rifle isn’t shooting quite as well as expected, cleaning the bore and re-leading the barrel is all that’s usually needed to restore the gun’s inherent accuracy. This is a fairly gentle, non-invasive process, but what happens if it fails to work?So why wait? Keep your air rifle in top shape with Napier's pull-through kit and enjoy a smooth, accurate shot every time. Your air rifle (and your aim) will thank you! Drinking straw: A straw gives the pull-though a head start any time you’re trying to clean a barrel that doesn’t offer direct access to the muzzle, such as a shrouded barrel with a non-removable end cap.